Serving Las Vegas and the whole valley
Free Quotes (702) 769-4416
Ram Masonry
Fireplace Remodeling in Las Vegas, NV
Our Services

Fireplace Remodeling in Las Vegas, NV

Fireplace Remodeling · Las Vegas, NV

Fireplace remodeling for homes across the Las Vegas valley

We do fireplace remodeling for Las Vegas homes, from a new stone face to a rebuilt firebox. Refacing covers the wall in stone veneer or brick, floor to ceiling or just the surround. We tear out old hearths and surrounds and build new ones. We rebuild worn fireboxes in firebrick and build new masonry fireplaces to the plan. Ram Masonry has worked across the valley since 2014, and we cover masonry and stone work in Summerlin too. We carry Nevada C-18 masonry license number 0080771, bonded and insured, with workers' compensation coverage.

Most calls start with a fireplace that looks dated. The surround is builder-grade tile or plain brick, and the hearth is chipped or cracked. Some people want gas where the wood fire used to be. Others have firebrick that has cracked and come loose. We start by learning what is there: masonry or a factory-built unit, wood or gas. That answer sets which rules apply and which other trades join the job. Text photos to (702) 769-4416, and we follow up with a free written estimate.

What We Handle

  • Stone veneer refacing, floor to ceiling or surround only
  • Brick and thin brick fireplace faces
  • Tear-out and haul-off of old surrounds
  • Raised and flush hearths and hearth extensions
  • Masonry surrounds for listed gas and wood units
  • Firebox rebuilds in firebrick and refractory mortar
  • New masonry fireplaces built to the plan
  • Metal lath and scratch coat over drywall
  • Gas lines run by licensed plumbing contractors
  • Free written estimates across the valley

Free Fireplace Remodeling Quote

Tell us about your project and we’ll get right back to you.

What Fireplace Remodeling Covers in Las Vegas Homes

A fireplace remodel can be a new face or a full new build. Refacing puts stone veneer or brick over the old face. A tear-out takes the surround and hearth down so both can be rebuilt. We build raised and flush hearths and hearth extensions. We also build masonry surrounds around listed gas or wood units, set to that unit's clearances. Firebox rebuilds and new masonry builds are part of the work too.

Many older valley homes still have the builder-grade surround they came with. Wood-burning or gas, we work on both and build both new. Calls come from homeowners, builders and property managers. On a new build, a licensed plumbing contractor runs any gas, and the unit comes from the dealer. Outdoor fireplaces, fire pits and pizza ovens are a separate service, covered under backyard fire features in block and stone.

Can You Reface a Fireplace With Stone or Brick?

Yes, and the face material shapes the job. Stone veneer comes as natural stone or manufactured stone, and both set in mortar. Thin brick is a slice of brick that sets the same way. Full brick is heavier and needs a solid base to sit on. Nevada's C-18 masonry license covers brick, natural stone and manufactured stone. Our page on natural and manufactured stone veneer work covers the stone itself.

Over drywall, we fasten metal lath and trowel on a scratch coat before the face goes on. The face sits on the hearth or stops at it with a clean joint. Stone can be grouted or dry stacked tight. Under the code Clark County adopted, wood trim and mantels stay at least 6 inches from a masonry fireplace opening. A finish carpenter sets any wood mantel after the masonry is done.

Rebuilding the Hearth and Surround

A tear-out starts with floor covers and plastic walls to hold the dust. We take the old surround and hearth down to the structure behind them. The old material leaves with us as part of the job. Masonry hearths need noncombustible support, with no wood left against their underside. A new masonry fireplace sits on a footing at least 12 inches thick. We pour concrete footings to the plan for it.

A flush hearth sits level with the floor, and a raised hearth sits up off it. On a masonry fireplace, the hearth extension runs at least 16 inches out front and 8 inches past each side. Once the opening reaches 6 square feet, those grow to 20 and 12 inches. The hearth is at least 4 inches thick and the extension at least 2 inches. When the firebox opening sits at least 8 inches above the extension, the code allows a thinner extension.

How Does a Firebox Rebuild Work?

A firebox rebuild is for masonry wood-burning fireplaces. Cracked or spalled firebrick means the lining is worn. We cut out the worn lining and lay new firebrick. Code calls for firebrick at least 2 inches thick, laid in medium-duty refractory mortar. Joints between firebricks stay at 1/4 inch or less. The same code sets a masonry firebox at least 20 inches deep. A chimney company inspects the flue before we start and after we finish.

Prefab units work differently. A factory-built unit is listed and labeled, and it is installed to the terms of its listing. The surround and hearth extension follow that unit's own listing, so we read its manual before we set any stone. The dealer replaces a worn prefab firebox with a new listed unit. Once the new unit is in, we build the stone or brick surround.

Gas Lines, Permits and Planning a Fireplace Remodel

Nevada licenses gas piping as C-1g under plumbing, so a licensed plumbing contractor runs it. In the City of Las Vegas, gas piping between the meter and any appliance needs a mechanical permit. Clark County requires a permit to construct, alter or repair a structure, so a new masonry fireplace needs one. Painting and similar finish work are exempt in the county and the city. Neither list names fireplaces, so we confirm a reface with the permit desk for your parcel.

Henderson, North Las Vegas and Boulder City run their own permit desks. Changes that show outside the house can need HOA approval too. The written estimate lists the face material, its square footage and the hearth work. It includes demo and haul-off of the old surround, and it names who handles gas and flue. To start, send us photos of your fireplace.

Finished red brick fireplace with a raised brick hearth inside a Las Vegas home Stone veneer fireplace face with a brick ledge around the firebox opening

Ready to get started?

Free, no-obligation estimates across Las Vegas and the whole valley.

(702) 769-4416
How We Work

How a Job With Ram Masonry Runs

From the first look at the site to the final walk-through, here is exactly how it goes.

1

Look at the Job

Call or send the form, and photos by text get a fast first read. For a firm number we come out, measure the run, and check what sits under the job: grade, access, caliche, old work.

2

Price in Writing

You get a written price and timeline before any work starts. If a permit or engineering applies, the estimate says so. Repair and rebuild get quoted as separate numbers when both are on the table.

3

Build It Right

Footings dug to bearing and inspected, rebar and grout in the cells, base compacted before concrete, mortar kept from drying too fast in the heat. The parts you never see get built like the parts you do.

4

Walk It Together

We walk the finished work with you: walls plumb, joints full, slabs draining the right way, site cleaned up. Done means you have looked at every part of it and said so.

FAQ

Fireplace Remodeling Questions, Answered

Common questions about fireplace remodeling across Las Vegas and the whole valley. Don't see yours? Give us a call and ask.

Call (702) 769-4416

How much does it cost to reface a fireplace?
A national cost guide puts stone veneer over a fireplace at $1,300 to $5,000 installed. Height and stone type set where a job lands, the guide says. A tear-out, a new hearth or a switch to brick changes the number too. Our guide to what stone veneer costs in Las Vegas covers the stone side.
Can you put stone veneer over an existing brick fireplace?
Yes, if the brick is solid. Loose or crumbling brick gets fixed or taken off first. Clean, unpainted brick can take the stone in mortar. Painted brick needs metal lath or cement board first, so the mortar has something to hold. We check the brick and the hearth before we price the reface.
Can a wood-burning fireplace be converted to gas?
Yes, with a listed gas insert or log set from a dealer. A licensed plumbing contractor runs the gas line. We build the masonry and the new face around the unit. A prefab box takes an insert only if its listing allows it. A chimney company checks that the flue lining suits the new appliance.
Do I need a permit to remodel a fireplace in Las Vegas?
It depends on the work. Clark County requires a permit to construct or alter a structure, so a new masonry fireplace needs one. Gas piping takes its own mechanical permit in the City of Las Vegas. The county and city exempt painting and similar finish work, but neither list names fireplaces. We confirm a reface with your permit desk first.
How long does a fireplace remodel take?
It depends on the size of the face and how much comes out. For a reface, we cover the room and take off the old surround. Any scratch coat sets before the stone or brick goes on. Hearth or firebox work adds steps, and we set the timing with you at the estimate.
Can you reuse or match the old brick on my fireplace?
Often, yes. Sound brick from a tear-out can be cleaned and laid again. For new brick, we match size, color, texture and mortar color as close as supply allows. Some older brick is no longer made, so we tell you before anything comes down. Our page on brick work and matching existing brick covers the details.
More From Ram Masonry

Explore Our Other Services

Fireplaces and Fire Pits in Las Vegas, NV

Fireplaces and Fire Pits

We build outdoor fireplaces, fire pits and pizza ovens in block, brick and stone. Wood or gas. Free written estimates.

Learn More
Stone in Las Vegas, NV

Stone

We install stone veneer on homes and businesses across Las Vegas. Full exteriors, accent walls, archways, and columns. Natural and manufactured stone, set over lath and mortar. Licensed masonry contractor, free estimates.

Learn More
Brick in Las Vegas, NV

Brick

We build and repair brick for homes and businesses in Las Vegas. Brick walls, columns, veneer, fireplaces, mailboxes, and planters. Licensed C-18 masonry contractor since 2014. Free estimates across Clark County.

Learn More
From Our Blog

Fireplace Remodeling Guides

Why Choose Ram

Why Las Vegas Calls Ram Masonry

Masonry Is the Trade

Block, brick, stone and concrete are the whole business, not a sideline. Footings dug to bearing, cells grouted around steel, joints struck full. That is why the walls we build stay straight.

Built for the Desert

Vegas heat and monsoon wind punish shortcuts. Early summer pours, mortar kept from drying too fast, drainage behind every retaining wall, footings cut through caliche instead of stopping on it.

Priced in Writing, Free

We look at the job, measure it, and put the price and timeline in writing before work starts. Photos by text get a fast first read. The estimate costs nothing either way.

Licensed, Bonded, Insured

Nevada C-18 masonry license #0080771, bond and insurance on file. The license is what lets us pull your wall permit, and it covers commercial work at the same standard as residential.

Start Your Project

Get In Touch With Ram Masonry

A wall that worries you, a driveway past its best, or a backyard ready to become the good part of the house? Call or send the form and we will look at the site with you and hand you a straight written quote.

Get a Free Quote

Tell us about your project and we’ll get right back to you.

Call (702) 769-4416